For those who’ve bought a Mini 3 Professional, or are pondering of doing so sooner or later, you’ll most probably be trying to take and share both 12mp or 48mp photographs and 4k movies.
With the Mini 3 Professional’s portability and improbable picture high quality ‘skies the restrict” on the subject of creativity.
This text and the included YouTube video can be a step-by-step tutorial exhibiting how you can insert and eject the micro-SD card, in addition to format SD playing cards for each the Mini 3 Professional drone and the DJ RC.
Inserting the Micro-SD Card (Mini 3 Professional)
As DJI drones proceed to progress and enhance over time, they’re able to accommodate bigger capability SD playing cards.
Gone are the times of the Unique Mavic Professional with its 64 GB maximum-sized playing cards. The Mini 3 Professional can retailer photographs and movies on SD playing cards as much as 512 GB.
To insert these bigger capability playing cards into the Mini 3 Professional:
STEP 1: Make sure that the Mini 3 Professional is powered off.
Whereas holding the Mini 3 Professional in a single hand, fastidiously insert the SD card into the Mini 3 Professional SD card slot, with the gold pin set pointed up (in the direction of you). Don’t push the cardboard in all the best way simply but, as it should most probably fly out throughout the room.
STEP 2: Whereas the SD card is within the slot, utilizing your fingernail at a slight angle, push the SD card in till it makes an audible “click on”.
As a result of the SD card slot is spring loaded, when you don’t press the sd card in with a nail at a slight angle, your finger might slip, inflicting the cardboard to eject and fly away from you.
Inserting the Micro-SD Card (DJI RC)
For those who personal the combo with the DJI RC, you’ll see that there’s additionally an SD card slot within the distant controller as properly.
The SD card on the DJI RC is at the moment used for storing screenshots and display recording clips. Time will inform if DJI provides extra objects that may be saved to the SD card.
» MORE: DJI Mini 3 – 13 Tips and Tricks for Your New Drone (for extra data on screenshots and display recording)
To insert an SD card into the DJI RC:
STEP 1: With the DJI RC powered off, flip the DJI RC over and open the SD card/USB-C port cowl.
STEP 2: Like with the Mini 3 Professional SD card, partially insert the SD card into the DJI RC SD card slot, with the gold pin set pointed up.
STEP 3: Push the SD card in till it makes an audible “click on”.
Formatting the Micro-SD Card (Mini 3 Professional)
The method for formatting SD playing cards which can be within the Mini 3 Professional is completed throughout the DJI Fly app, whether or not you’ve gotten a DJI RC or the RC-N1 distant controller.
To format the SD card, after powering on each the Mini 3 Professional and your present RC:
STEP 1: Whereas within the DJI Fly app, go into your settings and find the CAMERA tab.
STEP 2: Below storage, press format. You can be offered with an choice to format both the SD card or Inner Storage. Select SD card and press Format.
Formatting the Micro-SD Card (DJI RC)
Not like formatting the SD card within the Mini 3 Professional, to format the DJI RCs SD card you are able to do so from any display whereas the RC is powered on.
To format the DJI RCs SD card:
STEP 1: Pull down the DJI RCs notification display by double swiping down.
STEP 2: Press the settings/choices gear within the higher right-hand nook of the display.
STEP 3: Faucet STORAGE
STEP 4: On the underside of the display, below Transportable Storage, you will notice your SD card. Mine is labeled DJIRC.
Faucet in your SD card’s title. You’ll see your SD playing cards used house.
STEP 5: Press Format. You’ll then be requested to format the SD card. For those who select to format right now, press FORMAT SD CARD or in any other case select CANCEL
Ejecting the Micro-SD Card
Ejecting the SD card from both the Mini 3 Professional or DJI RC is dealt with the identical.
Warning should be exercised when eradicating both SD card, as a slip of the finger may cause the SD card to force-eject randomly.
To eject both the Mini 3 Professional or DJI RC SD card:
STEP 1: Utilizing a thumbnail, at a slight angle, push the SD card in after which slowly take away your thumb.
STEP 2: Rigorously pull the SD card out.
Tip: When you’ve got bigger fingers, or discover it troublesome to take away the SD card, merely connect a chunk of scotch tape to the top of the SD card, successfully making a tab to tug the SD card out.